No one wants to live in a home or work in an office with a dirty floor. Cleaning may not be the easiest chore and a lot of people would rather not do it. The cleaning process involves some degree of preparation;the right cleaning products have to be bought and arrangements have to be made to have on site good cleaning equipment. Just about anyone can mop clean a floor,some times,but there are some other processes that are performed on floors such as stripping that require a certain level of expertise.You may handle the cleaning and restoration exercise yourself if you have the practical experience required to handle it right. If you are busy or don’t have the skills required,you may want to hire a cleaning,stripping and waxing service in Lubbock. This article will attempt to explain the three floor maintenance processes of cleaning,stripping and waxing,in the hope that this knowledge will help you do a better job. Take a look at the information about the Floor Maintenance Lubbock.
Sweeping and dusting is an effective way of keeping your floor free of dirt or grime. Remove spilled liquids and foods immediately the accident happens. Use vacuum cleaners in places with a lot of dirt and mess.
Place mats in places where the floor surface may be degraded by the effects of the elements of the weather such as too much moisture. You could use your regular nail polish remover to eliminate tough floor stains. Ensure that the brush or mop you use on your floor doesn’t cause scratches and other damage to your floor. There are some surfaces that may necessitate the use of a powered floor scrubber-such as industrial surfaces. Choose the right cleaning solution.
After you have done a serious cleaning job on the floor,you need to do some stripping. You may notice some worn down areas on the floor,or some scratches and dirt that is sunk into the floor’s structure;these can be effectively removed by performing some stripping work. Insure that the stripping chemical you use is one that the manufacturer recommends for your floor. You can use a mop to apply the chemical evenly all over the surface,avoiding excess in certain areas. The purpose of stripping is to remove all the wax from the floor so that the surface can take up a new coat. A wet-dry vacuum machine can be used to remove the wax that has build up as well as the stripper solution. Wash the floor with a mop and then let it dry;this ensures all wax residues and stripping chemical is removed. For more information about floor maintenance http://awesomeshine.org/floor-strip-wax/ follow the link.
After stripping,the floor needs some waxing. Apply 2-5 wax layers,depending on your floor and preference. Buffing is finally done to give the floor a clean,fresh,shiny gloss that makes it look fabulous.
If all this sounds too much and involving,it is because it’s involved and that’s why you want to work with skilled floor maintenance professionals in Lubbock.